SoapSwap Forums

Elle McDade
Re: troubleshooting my first 2 batches of soap - 1998/05/04 09:44 "Rhea,
I've never used tallow in my soaps nor have I used only olive oil by itself. Perhaps I'm not qualified to answer your paticular questions but having made 15 batches at 16lbs each and never having one close to failing I'll offer you this much:
Weighing and measuring using a scale not measuring cups is critical! If you do nothing else, you MUST have accurate measurements. The only way get them is with a scale. The second and just as critical thing is the amount of sodium hydroxide (lye) for each type of oil used in your recipe. Refer to the SAP chart at this will enable you to calculate the correct proportions you will need for the proper soponification to take place.
I'm not surprised that a pure olive oil bar would tourn out sticky as you described. I use a mixture of coconut oil, palm kernel oil and olive oil. Each base oil contributes its own special qualities to the final product. I.E. coconut oil is great for a nice thick lather, palm kernel makes for a harder bar thus longer sink-life, etc.
Read books and keep checking on the questions and responses from other 'soapers' at this site and you'll be sure to learn where where you went wrong and what you need to do differently.
Hope this tidbit helps. Happy Soaping "up there" From "down here in San Diego California"
  | | The administrator has disabled public write access.

      Topics Author Date
    thread link
Troubleshooting my first 2 batches of soap
Rhea 1998/05/01 05:09
    thread link
thread linkthread link Re: troubleshooting my first 2 batches of soap
Elle McDade 1998/05/04 09:44